My First Post - Does anyone know anything about the Solectria DW Electric Car?

Open for any sort of non-technical discussion regarding EVs
Post Reply
waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Mon, 29 Jul 2019, 18:13

Hi AEVA Members,

Just hear to understand EV and have a Project car to learn and experience the EV life but I need to do some learning first and maybe you guys can help me.

Firstly, Has anyone got a Daewoo Cielo Solectria DW Electric Car here or have much experience with them? or know anything about them and its hardware?

Got some questions also, Please excuse my Noobness -

1 - With the Batteries, If the Motor is a 240v AC motor, Does that mean if I buy 12v Batteries x20 will = 240V or am I missing something?

2 - If I use 24v Truck batteries would that mean I only need to use x10 to make 240v?

3 - If I wanted to test the AC motor on my car, is there a way to test it beside using Batteries? like the Main Power? or Just a handful of batteries to just see it turns?

4 - How do you work out what Change controller to get or what determines this? The batteries you buy? Ah?

Thank you for all your help and knowledge. I had looked very hard for the Seach function on this forum and couldn't find it at all so had no choice to but make a Post.

I'm from Victoria S.E side.
Again Thank you for your time.

antiscab
Senior Member
Posts: 2357
Joined: Mon, 26 Nov 2007, 05:39
Real Name: Matthew Lacey
Location: Perth, WA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by antiscab » Tue, 30 Jul 2019, 02:55

A solectria in Australia, that's somewhat unusual.
Can you take some pictures, for curiosity sake?

If the motor is 240vac you will likely be dealing with a 320v battery or there abouts. So maybe 16 12v batteries.
Do you know what batteries are installed at present?
Lead acid 12v is usually to heavy, though if solectria have set the vehicle up for the weight you may be Okay
Matt
2017 Renault zoe - 25'000km
2007 vectrix - 156'000km
1998 prius - needs Batt
1999 Prius - needs batt
2000 prius - has 200 x headway 38120 cells

Richo
Senior Member
Posts: 3599
Joined: Mon, 16 Jun 2008, 00:19
Real Name: Richard
Location: Perth, WA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by Richo » Tue, 30 Jul 2019, 12:39

Yeah I doubt there is actually one in Oz.
http://www.autospeed.com/cms/article.ht ... Car&A=0789

Really you can convert anything.
I'd expect there to be something else in Oz that would be better value.
Help prevent road rage - get outta my way! Blasphemy is a swear word. Magnetic North is a south Pole.

Richo
Senior Member
Posts: 3599
Joined: Mon, 16 Jun 2008, 00:19
Real Name: Richard
Location: Perth, WA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by Richo » Tue, 30 Jul 2019, 12:50

waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
1 - With the Batteries, If the Motor is a 240v AC motor, Does that mean if I buy 12v Batteries x20 will = 240V or am I missing something?
To make a Sinewave From DC the DC needs to be 1.414 SQRT(2) times higher than the AC.
So as stated above you need 240V AC x 1.414 = 340V DC
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
2 - If I use 24v Truck batteries would that mean I only need to use x10 to make 240v?
Yes - but again x 1.414
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
3 - If I wanted to test the AC motor on my car, is there a way to test it beside using Batteries? like the Main Power? or Just a handful of batteries to just see it turns?
The motor controller will have a VOLTAGE MINIMUM setting.
If you are below this the motor controller wont turn the motor.
For example you may need 285V DC minimum.
Rectifying mains will get the Voltage but only 2kW of power.
It might work but I don't recommend doing this for safety reasons.
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
4 - How do you work out what Change controller to get or what determines this? The batteries you buy? Ah?
Change?!?
You mean charger?

Most battery packs for ev's are large so it would be difficult to charge them too fast from a power point.
From a power point of view if you intend to charge from a regular power point get a 2400W charger.
If you have a 15A power point get a 3kW charger.

Next is the terminating voltage (maximum charged voltage of the battery pack).
Then after is the chemistry try eg lithium, Lead acid etc...

You need to know the voltage and chemistry of your battery pack before you can get the charger.


Ask more questions - get more answers ;)
Help prevent road rage - get outta my way! Blasphemy is a swear word. Magnetic North is a south Pole.

lobster
Noobie
Posts: 13
Joined: Wed, 13 Jul 2011, 18:03
Location: Adelaide SA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by lobster » Tue, 30 Jul 2019, 17:18

Richo wrote:
Tue, 30 Jul 2019, 12:39
Yeah I doubt there is actually one in Oz.
http://www.autospeed.com/cms/article.ht ... Car&A=0789
Richo, a good link. The last line of the article dated 16 January, 2001 "Thanks to Peter Yates of Gerard Industries - owner of this car - for making it available to us."
This one may be in storage in Australia, Mistral is a brand of domestic fans sold in Australia.

The author of the article is an Aussie living near Canberra. Link below
https://www.amazon.com/Julian-Edgar/e/B ... uto0e22-20

waasi wrote;
I'm from Victoria S.E side. Are you in Australia, is this your car in the linked article?

Cheers, Steve

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 30 Jul 2019, 19:45

antiscab wrote:
Tue, 30 Jul 2019, 02:55
A solectria in Australia, that's somewhat unusual.
Can you take some pictures, for curiosity sake?

If the motor is 240vac you will likely be dealing with a 320v battery or there abouts. So maybe 16 12v batteries.
Do you know what batteries are installed at present?
Lead acid 12v is usually to heavy, though if solectria have set the vehicle up for the weight you may be Okay
Yes I will take some photos, but the car from the Article which is in the link above is the exact car I have bought.

The car did not come with batteries or a charger. but I know what it did have in it. Yes the car suspension is Setup to take the weight.

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 30 Jul 2019, 19:50

Richo wrote:
Tue, 30 Jul 2019, 12:39
Yeah I doubt there is actually one in Oz.
http://www.autospeed.com/cms/article.ht ... Car&A=0789

Really you can convert anything.
I'd expect there to be something else in Oz that would be better value.
That is the car in the Article I have got.

Yes there are better cars out there, but I liked that fact its all done professionally and it has an AC motor which is better from my understanding.

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 30 Jul 2019, 19:59

lobster wrote:
Tue, 30 Jul 2019, 17:18
Richo wrote:
Tue, 30 Jul 2019, 12:39
Yeah I doubt there is actually one in Oz.
http://www.autospeed.com/cms/article.ht ... Car&A=0789
Richo, a good link. The last line of the article dated 16 January, 2001 "Thanks to Peter Yates of Gerard Industries - owner of this car - for making it available to us."
This one may be in storage in Australia, Mistral is a brand of domestic fans sold in Australia.

The author of the article is an Aussie living near Canberra. Link below
https://www.amazon.com/Julian-Edgar/e/B ... uto0e22-20

waasi wrote;
I'm from Victoria S.E side. Are you in Australia, is this your car in the linked article?

Cheers, Steve

Hi Steve,
Yes that is the car I have got. Yet it was stored for the last 9 years so I hope to give it a new life. First I need to learn the basics before I start touching the car.

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 30 Jul 2019, 20:19

Richo wrote:
Tue, 30 Jul 2019, 12:50
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
1 - With the Batteries, If the Motor is a 240v AC motor, Does that mean if I buy 12v Batteries x20 will = 240V or am I missing something?
To make a Sinewave From DC the DC needs to be 1.414 SQRT(2) times higher than the AC.
So as stated above you need 240V AC x 1.414 = 340V DC
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
2 - If I use 24v Truck batteries would that mean I only need to use x10 to make 240v?
Yes - but again x 1.414
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
3 - If I wanted to test the AC motor on my car, is there a way to test it beside using Batteries? like the Main Power? or Just a handful of batteries to just see it turns?
The motor controller will have a VOLTAGE MINIMUM setting.
If you are below this the motor controller wont turn the motor.
For example you may need 285V DC minimum.
Rectifying mains will get the Voltage but only 2kW of power.
It might work but I don't recommend doing this for safety reasons.
waasiFMC wrote:
Mon, 29 Jul 2019, 18:13
4 - How do you work out what Change controller to get or what determines this? The batteries you buy? Ah?
Change?!?
You mean charger?

Most battery packs for ev's are large so it would be difficult to charge them too fast from a power point.
From a power point of view if you intend to charge from a regular power point get a 2400W charger.
If you have a 15A power point get a 3kW charger.

Next is the terminating voltage (maximum charged voltage of the battery pack).
Then after is the chemistry try eg lithium, Lead acid etc...

You need to know the voltage and chemistry of your battery pack before you can get the charger.


Ask more questions - get more answers ;)
Hi Richo, Thank you for your reply to my questions.

I have very good hands-on skills working with cars and engine conversion and all that but EV is new to me and I'm keen to learn, But first Baby steps by asking questions.

1 - Thank you for clarifying that so the number I have to reach is 340v

2 - Thank you for that, As the car has the capacity of carrying 100 cells at the front and 100 cells in the back. I was thinking if 10 car batteries front and 10 back but I am still learning about the batteries and all that.

3 - Yes you are right there would be min to make it work. Guess there is no other safe way then getting batteries. but im worried to spend all that money to find out the other components are not working or damaged so just trying to see if we could test it first.

4 - Yes sorry Charger. Yes guess I need to start working out which way to go with the batteries. Also could I get the battery packs from cars like Nissan Leaf or Tesla and make it work?

Richo
Senior Member
Posts: 3599
Joined: Mon, 16 Jun 2008, 00:19
Real Name: Richard
Location: Perth, WA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by Richo » Wed, 31 Jul 2019, 12:22

Well it is a surprise that there was one in Oz.
Good find then :D
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
1 - Thank you for clarifying that so the number I have to reach is 340v
Yep or more specifically it will be the settings in the motor controller.
Perhaps you could find the model number of it somewhere.
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
2 - ...I was thinking if 10 car batteries front and 10 back...
Ok back when the car was built car batteries (lead acid) might have been the most viable option.
These days flooded cells are really a big fat NO.
Seal lead acid (SLA) or Gel Cells are the next step up - they have better deep discharge than a car battery.
Next will be Prismatic LiFePO4 such as Winston, thundersky, Sky Energy, Calib cells.
After this will be the 2nd hand cells from Leaf, Miev, Tesla etc but may come with complications and limited availability.
Then various lithium chemistry pouch cells and cylindrical cells get you to the top end.
But really you should be able to use any of them within the voltage setting limits in the motor controller.
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
3 - but im worried to spend all that money to find out the other components are not working or damaged so just trying to see if we could test it first.
This is when you need to phone a friend.
Perhaps there is someone near you from the AEVA that could check it out.
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
4 - Yes sorry Charger. Yes guess I need to start working out which way to go with the batteries.

Hmmm
Determine what voltage limits are in the controller.
So phone a friend to checkout the car to see if it runs.
Select your battery based on physical size, chemistry, cost.
Get a charger to mach the batteries.

Is it still registered?
Help prevent road rage - get outta my way! Blasphemy is a swear word. Magnetic North is a south Pole.

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 06 Aug 2019, 12:37

Richo wrote:
Wed, 31 Jul 2019, 12:22
Well it is a surprise that there was one in Oz.
Good find then :D
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
1 - Thank you for clarifying that so the number I have to reach is 340v
Yep or more specifically it will be the settings in the motor controller.
Perhaps you could find the model number of it somewhere.
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
2 - ...I was thinking if 10 car batteries front and 10 back...
Ok back when the car was built car batteries (lead acid) might have been the most viable option.
These days flooded cells are really a big fat NO.
Seal lead acid (SLA) or Gel Cells are the next step up - they have better deep discharge than a car battery.
Next will be Prismatic LiFePO4 such as Winston, thundersky, Sky Energy, Calib cells.
After this will be the 2nd hand cells from Leaf, Miev, Tesla etc but may come with complications and limited availability.
Then various lithium chemistry pouch cells and cylindrical cells get you to the top end.
But really you should be able to use any of them within the voltage setting limits in the motor controller.
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
3 - but im worried to spend all that money to find out the other components are not working or damaged so just trying to see if we could test it first.
This is when you need to phone a friend.
Perhaps there is someone near you from the AEVA that could check it out.
waasiFMC wrote:
Tue, 30 Jul 2019, 20:19
4 - Yes sorry Charger. Yes guess I need to start working out which way to go with the batteries.

Hmmm
Determine what voltage limits are in the controller.
So phone a friend to checkout the car to see if it runs.
Select your battery based on physical size, chemistry, cost.
Get a charger to mach the batteries.

Is it still registered?
No it's not registered and has not for the last 9 years sadly.

Thank you for the breakdown on the type of batteries and so on.

I have got some photos of the hardware and will attach them in a new post.

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 06 Aug 2019, 12:52

Ok so here is the photos and some of the photos of the components,

This is the Front Battery box -
20190719_130118.jpg
20190719_130118.jpg (3.46 MiB) Viewed 148 times
The Fuse Box (going to be fun finding fuses if its blown)
20190719_122435.jpg
20190719_122435.jpg (2.73 MiB) Viewed 148 times
The Motor under the front (48kw AC motor)
20190715_160411.jpg
20190715_160411.jpg (3.29 MiB) Viewed 148 times
DC - DC Converter
20190719_112816.jpg
20190719_112816.jpg (3.07 MiB) Viewed 148 times
The Air Conditioning Drive Motor
20190719_112807.jpg
20190719_112807.jpg (3.36 MiB) Viewed 148 times
Motor Controller
20190719_112802.jpg
20190719_112802.jpg (3.08 MiB) Viewed 148 times

Now with the Above Information, Maybe that can paint a more exact picture of what I need to get it going?

antiscab
Senior Member
Posts: 2357
Joined: Mon, 26 Nov 2007, 05:39
Real Name: Matthew Lacey
Location: Perth, WA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by antiscab » Tue, 06 Aug 2019, 14:01

I suspect the motor controller picture would be the controller for the A/C motor (being around 3kw)
Matt
2017 Renault zoe - 25'000km
2007 vectrix - 156'000km
1998 prius - needs Batt
1999 Prius - needs batt
2000 prius - has 200 x headway 38120 cells

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Tue, 06 Aug 2019, 15:22

antiscab wrote:
Tue, 06 Aug 2019, 14:01
I suspect the motor controller picture would be the controller for the A/C motor (being around 3kw)

No I think it is for the Actual Drive Motor which is AC. judging by its size.
20190719_130109.jpg
20190719_130109.jpg (2.95 MiB) Viewed 139 times
Here is a photo of it when its all fitted together (from the article)
0789_3mg.jpg
0789_3mg.jpg (104.8 KiB) Viewed 139 times

antiscab
Senior Member
Posts: 2357
Joined: Mon, 26 Nov 2007, 05:39
Real Name: Matthew Lacey
Location: Perth, WA

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by antiscab » Tue, 06 Aug 2019, 16:12

Yup, the big umoc440 50kw drive is definitely traction.

If still wanting to test it, I have a big stockpile of nhw10 sticks, probably enough to build a pack of high enogjh voltage. Capacity would be tiny, but they're cheap.

A full 40 stick pack is 288vdc, which should be enough for the van to move under its own power, to confirm operation of the mc and motor
Matt
2017 Renault zoe - 25'000km
2007 vectrix - 156'000km
1998 prius - needs Batt
1999 Prius - needs batt
2000 prius - has 200 x headway 38120 cells

waasiFMC
Noobie
Posts: 9
Joined: Sun, 07 Jul 2019, 20:28
Real Name: Waasi

Re: My First Post - Does anyone know anything about the Solectria DW Electric Car?

Post by waasiFMC » Wed, 07 Aug 2019, 11:17

antiscab wrote:
Tue, 06 Aug 2019, 16:12
Yup, the big umoc440 50kw drive is definitely traction.

If still wanting to test it, I have a big stockpile of nhw10 sticks, probably enough to build a pack of high enogjh voltage. Capacity would be tiny, but they're cheap.

A full 40 stick pack is 288vdc, which should be enough for the van to move under its own power, to confirm operation of the mc and motor
Yeah I am interested, I have sent you a PM but unsure if it actually sent. Let me know the price and will see which direction to go with it.

Thank you

Post Reply