Brendon_m Moke

Post up a thread for your EV. Progress pics, description and assorted alliteration
User avatar
jonescg
Senior Member
Posts: 2813
Joined: Thu, 21 Jan 2010, 23:05
Real Name: Chris Jones
Location: Perth, WA.

Re: Brendon_m Moke

Post by jonescg » Thu, 11 Jul 2019, 12:38

Can't look any more stolen that way. Good camo for your neck of the woods :)
AEVA National Secretary, WA branch vice-chair

T1 Terry
Senior Member
Posts: 892
Joined: Thu, 30 Sep 2010, 20:11
Real Name: Terry Covill
Location: Mannum SA

Re: Brendon_m Moke

Post by T1 Terry » Thu, 11 Jul 2019, 13:33

brendon_m wrote:
Thu, 11 Jul 2019, 11:21
I could paint it rattle can flat black for that stolen look
Stolen stealth, can't hear it or see it :lol:

T1 Terry
Green but want to learn

User avatar
brendon_m
Groupie
Posts: 261
Joined: Sat, 28 Oct 2017, 11:00
Real Name: Brendon McCarrol

Re: Brendon_m Moke

Post by brendon_m » Sun, 28 Jul 2019, 19:58

Not too much progress over the weekend but I did get most of the way through the 2nd half of the pack.
IMG_20190728_155733.jpg
IMG_20190728_155733.jpg (3.79 MiB) Viewed 245 times

User avatar
brendon_m
Groupie
Posts: 261
Joined: Sat, 28 Oct 2017, 11:00
Real Name: Brendon McCarrol

Re: Brendon_m Moke

Post by brendon_m » Sat, 10 Aug 2019, 20:46

Got the 2nd pack in.
IMG_20190803_154006.jpg
IMG_20190803_154006.jpg (3.22 MiB) Viewed 187 times
Not that you can see much in the picture

T1 Terry
Senior Member
Posts: 892
Joined: Thu, 30 Sep 2010, 20:11
Real Name: Terry Covill
Location: Mannum SA

Re: Brendon_m Moke

Post by T1 Terry » Mon, 12 Aug 2019, 10:25

Certainly a stealth battery pack install using an otherwise wasted space. Will you need to fit any cells in the back area as well, or will all the cells fit in the side pods?

T1 Terry
Green but want to learn

User avatar
brendon_m
Groupie
Posts: 261
Joined: Sat, 28 Oct 2017, 11:00
Real Name: Brendon McCarrol

Re: Brendon_m Moke

Post by brendon_m » Mon, 12 Aug 2019, 10:58

The whole lot is installed the 2 side pods. 2x 48v 150ah (13s3p) packs, one down each side and wired in series giving me 96v150ah (26s3p) total.
I've done up the cabling (mostly) as well now so I had the motor turning. On a side note I think the cable speedo is going to drive me nuts, it's horrendously loud

User avatar
brendon_m
Groupie
Posts: 261
Joined: Sat, 28 Oct 2017, 11:00
Real Name: Brendon McCarrol

Re: Brendon_m Moke

Post by brendon_m » Mon, 12 Aug 2019, 11:02


User avatar
jonescg
Senior Member
Posts: 2813
Joined: Thu, 21 Jan 2010, 23:05
Real Name: Chris Jones
Location: Perth, WA.

Re: Brendon_m Moke

Post by jonescg » Mon, 12 Aug 2019, 11:08

Very cool! Granted your build is far simpler than the Prelude, you beat me to the wheel spin up by a few days!
AEVA National Secretary, WA branch vice-chair

wovenrovings
Noobie
Posts: 23
Joined: Sat, 10 Jun 2017, 22:59
Real Name: Daniel Mulder
Location: Bundaberg

Re: Brendon_m Moke

Post by wovenrovings » Mon, 12 Aug 2019, 17:19

Thats awesome. So did you take the bulkheads out of the side boxes? Including the bottom out of the original battery box?
I asking because if that bit is still good it could be useful for me. ;)

User avatar
brendon_m
Groupie
Posts: 261
Joined: Sat, 28 Oct 2017, 11:00
Real Name: Brendon McCarrol

Re: Brendon_m Moke

Post by brendon_m » Mon, 12 Aug 2019, 19:09

The majority of the floor / inside of the pods is a custom made job from the guy before me so unfortunately it wouldn't suit any other mokes.
The top, sides and ends of the side pods are intact. I cut a big rectangle in the bottom of the pods and then cut/ground all the inner partitions out. The battery packs then get jacked up into position from underneath and bolted in place.
So the view from underneath is this
IMG_20190812_184630.jpg
IMG_20190812_184630.jpg (1.39 MiB) Viewed 142 times
Each pack takes up the whole length of the pods with about 15mm to spare at the rear
And the top/sides looks like nothing much has happened. (other than my daughters zip line across the roll cage)
IMG_20190812_184322.jpg
IMG_20190812_184322.jpg (3.31 MiB) Viewed 142 times
I'll have to make up new sheets to cover the bottom of the cells and reseal the side pods.

User avatar
Adverse Effects
Senior Member
Posts: 1074
Joined: Sat, 01 Jan 2011, 03:30
Real Name: Adverse Effects
Location: Brisbane

Re: Brendon_m Moke

Post by Adverse Effects » Tue, 13 Aug 2019, 08:34

looking good

i have always wanted to make a Mini and/or Moke in to a EV rear wheel drive i think it would be interesting
If you don't have time to do it right,
When will you have time to do it over

Help those who help themselves first

T1 Terry
Senior Member
Posts: 892
Joined: Thu, 30 Sep 2010, 20:11
Real Name: Terry Covill
Location: Mannum SA

Re: Brendon_m Moke

Post by T1 Terry » Tue, 13 Aug 2019, 11:20

Adverse Effects wrote:
Tue, 13 Aug 2019, 08:34
looking good

i have always wanted to make a Mini and/or Moke in to a EV rear wheel drive i think it would be interesting
It would have to be 4WD so you could take on the off roaders as well as hill climb boys :lol:
Green but want to learn

francisco.shi
Groupie
Posts: 209
Joined: Mon, 17 Sep 2018, 16:30
Real Name: Francisco
Location: Brisbane, Strathpine

Re: Brendon_m Moke

Post by francisco.shi » Tue, 13 Aug 2019, 12:10

Put a Tesla drive train on front and back and it will upset any petrolhead on the road.

User avatar
Adverse Effects
Senior Member
Posts: 1074
Joined: Sat, 01 Jan 2011, 03:30
Real Name: Adverse Effects
Location: Brisbane

Re: Brendon_m Moke

Post by Adverse Effects » Wed, 14 Aug 2019, 08:04

T1 Terry wrote:
Tue, 13 Aug 2019, 11:20
It would have to be 4WD so you could take on the off roaders as well as hill climb boys :lol:
hmmmmm

francisco.shi wrote:
Tue, 13 Aug 2019, 12:10
Put a Tesla drive train on front and back and it will upset any petrolhead on the road.
wouldnt fit in any way lol

hmm jacked up 4WD with 2 of the smaller tesla drive units hmmm
If you don't have time to do it right,
When will you have time to do it over

Help those who help themselves first

User avatar
brendon_m
Groupie
Posts: 261
Joined: Sat, 28 Oct 2017, 11:00
Real Name: Brendon McCarrol

Re: Brendon_m Moke

Post by brendon_m » Wed, 14 Aug 2019, 10:45

2 tesla drive units probably weigh more than the moke shell although that would make a great power to weight ratio, but unfortunately I suspect I'd get in, take off and fry all 4 tyres in an instant...
Reminds me of the go-cart I made out of a subaru ej25.
Custom frame so it was basically an engine, gearbox and diff with as little holding them together as possible.
I kept the all wheel drive but I cut the tailshaft down and welded the 2 uni joints together. It was quite a sight.
DSC_1410.JPG
DSC_1410.JPG (1.03 MiB) Viewed 105 times
DSC_1413.JPG
DSC_1413.JPG (1.04 MiB) Viewed 105 times
DSC_1420.JPG
DSC_1420.JPG (1.21 MiB) Viewed 105 times
Look at the baby tailshaft

Just at idle the thing would tear off like you wouldn't believe, let alone putting your foot down...

User avatar
jonescg
Senior Member
Posts: 2813
Joined: Thu, 21 Jan 2010, 23:05
Real Name: Chris Jones
Location: Perth, WA.

Re: Brendon_m Moke

Post by jonescg » Wed, 14 Aug 2019, 10:48

That looks like something out of Mad Max... I can see how it would be quite the handful!
AEVA National Secretary, WA branch vice-chair

User avatar
Adverse Effects
Senior Member
Posts: 1074
Joined: Sat, 01 Jan 2011, 03:30
Real Name: Adverse Effects
Location: Brisbane

Re: Brendon_m Moke

Post by Adverse Effects » Wed, 14 Aug 2019, 12:19

that looks like a hoot to drive
If you don't have time to do it right,
When will you have time to do it over

Help those who help themselves first

Post Reply