Re: PIP5048MG: 3Phase Configuration: Fault 08 and anomalies.
Posted: Mon, 17 Feb 2020, 12:37
Iv'e used a CHTCC device (single phase=ZHRV2-54T and 3-phase=ZHRV2-S45). These are quite handy little devices with a display - great for making a pseudo ATS. Lots of features and you can set over-voltage, under-voltage, transfer times etc. You will need a decent change-over contactor though (break-before-make and all that).I'm thinking of having a Latronics ATS installed soon, that has a 12ms transfer time.