Changing an induction motor voltage

AC, DC, amps, volts and kilowatt. It's all discussed in here
francisco.shi
Senior Member
Posts: 652
Joined: Mon, 17 Sep 2018, 16:30
Real Name: Francisco
Location: Brisbane, Strathpine

Re: Changing an induction motor voltage

Post by francisco.shi »

Yes. The motor goes directly to the IGBTs. The reason industrial inverters are so big are as follows:
1) Air cooled. Heat sink and fan use lots of space.
2) Mains filters. You have to filter 50Hz AC so big capacitors and inductors.
3) Input bridge rectifier. Almost same size as inverter output.
4) Weigh and space is not important.
Post Reply