Page 1 of 1
FS: Complete parts to make EV
Posted: Mon, 18 Jun 2018, 13:18
by Kel
Item: I had my 1985 RX7 Series 3 converted ten years ago. Today I am having all of the electrics removed and will sell them, and the car, separately.
The motor is a Netgain Impulse 9 and the controller is a Zilla. ALL parts are there for a conversion. There are 45 Thundersky Lithium batteries, 3.2 v. 180 ah. Over the years I have replaced about 5 of them. So although they are mostly 10 years old, they still move the RX7 along very well. There is life in the batteries so they will be a good starter pack. The car has also been fitted with electric air-conditioning (which needs attention). Electric power steering pump.
Location: Perth
Item Condition: All used. I have many other spare parts having bought an EV for wrecking. Spare motor (needs brushes and I have a new set) and various other items
Reason for selling: Ten years is long enough for me in a 1985 car. I wanted a car with more comforts.
Price: $4000 (neg)
Payment Method: To be arranged
Extra Info: My name is Kel
Pictures:

- sm 2.jpg (38.19 KiB) Viewed 3816 times

- sm 3.jpg (63.53 KiB) Viewed 3816 times
Re: FS: Complete parts to make EV
Posted: Mon, 18 Jun 2018, 14:04
by jonescg
Kel wrote: ↑Mon, 18 Jun 2018, 13:18
Pictures: I am happy to send pictures (not sure how to add them to this post)

- Adding pics.JPG (30 KiB) Viewed 3825 times
Just make sure they are under 200 kB or so.
And while it's sad to see an EV reverted to ICE, I can appreciate the desire for more comfort
I'm sure there will be plenty of interest!
Cheers,
Chris
Re: FS: Complete parts to make EV
Posted: Mon, 18 Jun 2018, 14:22
by Kel
Thanks Chris - hope so
Re: FS: Complete parts to make EV
Posted: Tue, 19 Jun 2018, 12:43
by Richo
And how much for the whole lot as is?
Re: FS: Complete parts to make EV
Posted: Thu, 21 Jun 2018, 13:06
by Scotty T
Hi Kel, working out whether I have finances for these parts to kick my project off which stalled ages ago, it's a bargain! Assuming a 1k Zilla and the spare motor is an Impulse 9 too?
Re: FS: Complete parts to make EV
Posted: Fri, 22 Jun 2018, 13:02
by jonescg
Hi Kel,
Merv, a recent new member is interested in the controller if you're parting it out. He's not got forum access sorted out yet, but I can relay information to him. I suspect he's forgotten his password...
Re: FS: Complete parts to make EV
Posted: Fri, 22 Jun 2018, 20:15
by BeginnertoEV'S
Hi Kel,
I've only joined yesterday and am completely new to EV's. I'm also not able to post just yet but I found your thread and thought it would be perfect for my questions (hope you don't mind) I have always been into fast and/or powerful vehicles with ICE. I am extremely interested in EV's as I can see this is where the future lies. I do however still really like my old classic cars and my big F-Trucks. I have been doing a lot of reading up and I cant seem to find any info as to how to design a system. I really want to convert an old F-Truck. Would your system be adequate.
Cheers.
Re: FS: Complete parts to make EV
Posted: Sun, 24 Jun 2018, 17:00
by Scotty T
I'm a definite for this, pm'd.
Re: FS: Complete parts to make EV
Posted: Fri, 29 Jun 2018, 21:34
by Remixd
Also interested if it doesn’t work out with Scotty
Re: FS: Complete parts to make EV
Posted: Wed, 04 Jul 2018, 23:11
by Scotty T
No response so far

Re: FS: Complete parts to make EV
Posted: Mon, 09 Jul 2018, 11:20
by winners
Please can you get in touch with me ASAP regarding all of your EV parts.
Regards, Mark Winstanley
Re: FS: Complete parts to make EV
Posted: Tue, 10 Jul 2018, 07:20
by Scotty T
Hopefully the OP checks in soon as a queue is forming...
Re: FS: Complete parts to make EV
Posted: Tue, 10 Jul 2018, 10:31
by rhills
This is a good opportunity to use the mention functionality, it usually results in the individual concerned getting an email notifying them about your post...
@Kel, have you seen the queue of people wanting to buy your stuff?
Re: FS: Complete parts to make EV
Posted: Wed, 11 Jul 2018, 14:35
by Scotty T
Cheers @rhills I've sent a couple of PM's to @Kel too, maybe he just doesn't use the interwebs often.
Re: FS: Complete parts to make EV
Posted: Wed, 11 Jul 2018, 19:06
by rhills
@Scotty T, when you say "pm" is that the Private Messaging within the forum or did you email him? If you click on a username, you go to their profile page which enables you to email them as well. Some people elect not to be notified by email if they're sent a PM within the forum.
Cheers,
Re: FS: Complete parts to make EV
Posted: Thu, 12 Jul 2018, 06:35
by Scotty T
@rhills Private Message, @Kel doesn't have his email address listed on the profile.