Want to Sell: EV Parts for DC conversion

Open for any sort of non-technical discussion regarding EVs
Post Reply
Bicka
Noobie
Posts: 4
Joined: Fri, 27 Apr 2012, 05:43
Real Name: Adam Bickerdike
Location: Geelong

Want to Sell: EV Parts for DC conversion

Post by Bicka » Sun, 13 Oct 2019, 19:24

I am unable to post in the for sale section. Been on these forums since 2012 but haven't been active.

I have the following parts to sell:

EV PARTS

Netgain Warp 9 DC Motor
Adapterplate for Warp9 to Kia Rio
Power Steering Pump kit (with hydraulic fluid, hoses, connectors, etc)
Brake Vacuum Pump kit (with reservoir, check-valve, sensor, relay etc)
2 of Gigavac HV Contactors
2 of 300A HV Fuses
55A DC/DC converter
Inertia Sensor
Other miscellaneous items for above - cables, connectors, relays, fuses etc.

I have a Logisystems Controller that will do 120/144VDC / 500Amp continuous, 1000A Burst

I also have a Lithium TC Charger:
36Cell Charger, 3.2/3.65x36 = 115.2/131.4VDC (For Car)

Make me an offer. I can arrange shipping too.

I paid $2750 plus around $500 for the charger. But I am willing to take offers.

Regards,
Adam
0457770190
DSC_0059.JPG
DSC_0059.JPG (3.56 MiB) Viewed 375 times
DSC_0061.JPG
DSC_0061.JPG (3.07 MiB) Viewed 375 times

antiscab
Senior Member
Posts: 2490
Joined: Mon, 26 Nov 2007, 05:39
Real Name: Matthew Lacey
Location: Perth, WA

Re: Want to Sell: EV Parts for DC conversion

Post by antiscab » Mon, 14 Oct 2019, 07:10

Where are you located Adam?
Matt
2017 Renault zoe - 25'000km
2007 vectrix - 156'000km
1998 prius - needs Batt
1999 Prius - needs batt
2000 prius - has 200 x headway 38120 cells

User avatar
Richo
Senior Member
Posts: 3737
Joined: Mon, 16 Jun 2008, 00:19
Real Name: Richard
Location: Perth, WA

Re: Want to Sell: EV Parts for DC conversion

Post by Richo » Mon, 14 Oct 2019, 12:23

It Says Geelong...
So the short answer is NO but the long answer is YES.
Help prevent road rage - get outta my way!

Bicka
Noobie
Posts: 4
Joined: Fri, 27 Apr 2012, 05:43
Real Name: Adam Bickerdike
Location: Geelong

Re: Want to Sell: EV Parts for DC conversion

Post by Bicka » Mon, 14 Oct 2019, 12:45

Geelong, But I can travel or Post if needed. I work in South Geelong with access to pallets and forklifts and all sorts so getting it shipped out is a piece of cake.

The parts are stored inside my friends Garage in Corio. I have a ute which I can go grab everything at anytime.

Sadly the project never went ahead and now I am liquidating. I was so close. Really all that was left was the Batteries which were killer. and then life caught up with me.

It would be great to see the Warp9 put to good use.

I see you are in Perth, I think shipping wouldn't be too bad as it would be palletised and road freight.

I will need to get some more recent photos, PM me if you want closer pics of any of the specific parts.

Bicka
Noobie
Posts: 4
Joined: Fri, 27 Apr 2012, 05:43
Real Name: Adam Bickerdike
Location: Geelong

Re: Want to Sell: EV Parts for DC conversion

Post by Bicka » Fri, 15 Nov 2019, 13:31

All Parts now Sold.

Post Reply