Sangamo Watt Hour Meter

Open for any sort of non-technical discussion regarding EVs
Post Reply
User avatar
Posts: 18
Joined: Sun, 25 Nov 2012, 00:23
Real Name: Danny Ripperton
Location: Sydney

Sangamo Watt Hour Meter

Post by RIPPERTON » Wed, 08 Apr 2015, 16:53

Of course Ive already pulled mine apart because theres no such thing as non resettable and I reset mine back to 0.01 instead of 0.19.
Very tricky little interlocking crank handle from the counter/driver unit over to the rolling digit frame.
Get the white plastic facia off first with bent circlip pliers (compression) compressing the 2 spreader pins on the right then shift the facia over to the left to unhook it from the mount.
Then a single phillips head at the left side base of digit head and gently lift it out. Will have to remove the axle of the primary gear/crank then spin the main digits to zero.


2013 eFXC Champion

Senior Member
Posts: 3599
Joined: Mon, 16 Jun 2008, 00:19
Real Name: Richard
Location: Perth, WA

Sangamo Watt Hour Meter

Post by Richo » Wed, 08 Apr 2015, 20:27

Is this your preferred method of free energy Image
Help prevent road rage - get outta my way! Blasphemy is a swear word. Magnetic North is a south Pole.

User avatar
Senior Member
Posts: 1825
Joined: Tue, 23 Jul 2013, 16:05
Real Name: Kurt
Location: Fleurieu Peninsula, SA

Sangamo Watt Hour Meter

Post by offgridQLD » Wed, 08 Apr 2015, 23:46

            I have a few meters in service that have reading totals with no real relevance. New components have been swapped in and all I could do was note the number at changeover and subtract that from the new total.

Would be nice to reset it back to the new relevant reading.

Thanks for sharing.


Post Reply