Search found 121 matches

by solamahn
Thu, 27 Aug 2015, 19:06
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Will be good when these solid state li batteries become readily available. For the 4048 charging, it looks like you just need a break in the charging for it to go back into bulk charging mode.
by solamahn
Wed, 26 Aug 2015, 18:17
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

I just tried a 4048 on 240 charging and the start voltage was 50.9 and it went up to the bulk charge setting of 57v. I know with 2424 the start voltage has to be below 25 for it to go into bulk charging but I did not think it mattered with a 4048. If the charging starts at a high voltage then it wil...
by solamahn
Mon, 27 Jul 2015, 10:18
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP inverter repairs and hardware modifications
Replies: 361
Views: 10243

Re: PIP inverter repairs and hardware modifications

I don't know. It must have been this year some time. Hopefully yours has the 200's
by solamahn
Sun, 26 Jul 2015, 21:35
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP inverter repairs and hardware modifications
Replies: 361
Views: 10243

Re: PIP inverter repairs and hardware modifications

Yes. You notice that when AGM's are full, they don't regulate voltage as good. But that could be said of all battery chemistries, I think. I wonder if setting the float to 52 would help. But really the scc should react quick enough to a change in solar current so that it is not the batteries that at...
by solamahn
Sun, 26 Jul 2015, 13:57
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP inverter repairs and hardware modifications
Replies: 361
Views: 10243

Re: PIP inverter repairs and hardware modifications

Yes. Saw your videos. I don't think it is the number of panels or too much inductive load that has been causing the failures of mosfets on hs1. I have one site with a 2448ms running 15 x280w and 4 500 ltr deep freezers and no problem. It has 12 x 12v250ah AGM's. I just had another failure last week ...
by solamahn
Sat, 11 Jul 2015, 11:45
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Another good setup would be having a 4048ms with 04 set to sen and beside it a 2448ms. Common battery bank. 24 x 280w panels, 3 x 4 to each inverter and have separate ac out feeds. The 2448ms would feed lights, fridge and anything else that is on often and the 4048ms would feed the high power seldom...
by solamahn
Sat, 11 Jul 2015, 03:01
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

2 x 4 works good so 3 x 3 should be ok. It seems like it is better to have the mppt scc fed with higher voltage. The mppt range for 2424msx is 30 - 115. I have tried 1 x 7 and 2 x 8. With 1 x 7, a lot of the time, the PV voltage is around 30 which is too low. 2 x 4 gives PV around 60 when loaded and...
by solamahn
Sat, 11 Jul 2015, 02:11
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Here that model is pip2424msx. 60A mppt scc. Model 2448ms is good too. As long as you don't need more than 2.4kw out. They use less idle power. 3000w scc. But no parallel function. What configuration did you use to connect the panels. I use 4 x 2 on the 2424msx. 36v 280w panels.
by solamahn
Sat, 11 Jul 2015, 02:04
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

You have the latest model. They have changed from rj45 and nine pin cable to usb because most laptops do not have the nine pin serial port
by solamahn
Sat, 11 Jul 2015, 01:30
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Yes. The scc is powered from solar power
by solamahn
Fri, 10 Jul 2015, 11:45
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Yes. Thats the lastest version. Be good to know what the difference is between the 2. I will load 72.40 and see if I can notice any changes. One difference between 52 25 and 52 30 is the fan speed. What about U2, the scc firmware. What version have you got for that. You would have to expect that 72 ...
by solamahn
Fri, 10 Jul 2015, 02:08
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Or just get it from the LCD screen. Yours is probably 52 30.
by solamahn
Thu, 09 Jul 2015, 12:30
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

With 52 30 firmware, the fans run much slower on light loads. 1200w should make the fans run. You need to look at them to see them spinning. I turn the fans upside down and apply lanolin grease to their soldered terminals. I notice on late model pips that the fan soldered terminals are now coated so...
by solamahn
Sat, 04 Jul 2015, 18:10
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

How did you go.
by solamahn
Wed, 01 Jul 2015, 12:05
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Use big short battery cables. I am installing a 3248ms today. 12 x 280w 36v 4 x 3 and 8 x 250Ah AGM. No utility or generator. 6 panels facing east and 6 facing west. This setup does not seem to upset the MPPT. You might want to have your panels facing more to the east because the generator starts in...
by solamahn
Wed, 01 Jul 2015, 11:32
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Chris, It's got to be a typing error but even so you have nothing to worry about. You will never get more than 60A battery charging out of the solar panels and you will never get more than 60A battery charging from the generator. The generator starts at 5pm so there wont be much solar charging at th...
by solamahn
Wed, 01 Jul 2015, 01:34
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

I think the reason that the fans run fast all the time in firmware 52 25 is that mppsolar were trying to cure the problem of failures of the mosfets on hs1, thinking, like me taht it was an overheating problem. But running the fans fast all the time does not fix the problem. Higher rated mosfets doe...
by solamahn
Wed, 01 Jul 2015, 01:12
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

The more load that you place on the inverter, then the faster the fans run. Just tried 2.8kw and 3.6kw.
by solamahn
Wed, 01 Jul 2015, 00:59
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

I would expect that they are the same fans. If someone has one, can the take the bottom cover off and see what fans they are. I had a 4048 running 52 25 and changed it to 52 30 and now the fans run a lot slower. 2kw load and they were still slow.
by solamahn
Wed, 01 Jul 2015, 00:22
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Chris, I dont think you need to worry too much about putting too much current into your battery bank. They will take a lot of current when they are in a low state of charge and if you try to push too much current into a small battery bank, the voltage will rise to the equalise or float setting and t...
by solamahn
Wed, 01 Jul 2015, 00:17
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

52 30 firmware has the fans running slower and quieter
by solamahn
Tue, 30 Jun 2015, 14:37
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Chris,
I think all you need to do is enter appropriate values from the lcd screen. Just try scrolling through 02 and if 30 shows up, enter that. We use firmware 52 30
by solamahn
Tue, 30 Jun 2015, 12:01
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

Chris, Have you actually scrolled through the options of prog 02. I just read the old and new manual for prog 02. The old model clearly states the 6 options 10A to 60A. You have to read the new manual closely from page 14 to see that there are now 12 options for prog 02 4k/5k 10A to 120A. You should...
by solamahn
Tue, 30 Jun 2015, 11:19
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

All the old mosfets 11-320110-00G 120A, are 11-320138-00G, 200A in all new 3248/4048ms now
by solamahn
Tue, 30 Jun 2015, 11:13
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2460
Views: 473472

PIP-4048MS inverter

What size and how many solar panels have you got connected and in what configuration. Our prog 02 goes from 10A to 120A. What options does yours give. What are your options with prog 11?What have you got prog 16 and 31 set to. What have you got 05 set to? Possible solutions are: Set prog 16 to C50 S...