Search found 15 matches
- Sun, 27 Aug 2023, 07:29
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP inverter repairs and hardware modifications
- Replies: 1549
- Views: 333464
Re: PIP inverter repairs and hardware modifications
Mr. coulomb I have a patched firmware, the equalization disconected the load (2.4kw) from the battery (54v) and conected it to the grid at 12:50 (lot of sun and surplus energy charging). Voltage compensation is at minimum and still reads 0.1v high from real value when loaded. Works perfectly with eq...
- Thu, 24 Aug 2023, 04:11
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP inverter repairs and hardware modifications
- Replies: 1549
- Views: 333464
Re: PIP inverter repairs and hardware modifications
[ Edit Coulomb: Arrgh! I did it again! Edited instead of quoted. Sigh. So this is effectively a post by me, quoting CrAzY_DrIveR .] So you are telling me that the inverter will ignore all the loads, turn on the grid and use all pv power just to equalise the battery? No, but unpatched firmware, as we...
- Wed, 23 Aug 2023, 21:21
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP inverter repairs and hardware modifications
- Replies: 1549
- Views: 333464
Re: PIP inverter repairs and hardware modifications
Hi, i've been using my 5048ms for 20 days. Working perfectly until now, it was charging the battery and running 2400w output at the same time. switchJPG.JPG At 12:52 it turns on the grid and keeps charging the battery at 58A. I switch off the grid because my battery can't take all that energy and it...
- Mon, 21 Aug 2023, 05:25
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
yes i have, also in the code there is inverter0 so maybe you can monitor all 3 with 1 espHave you read somewhere there about the support of multiple PIP's? I have 3 pcs running in a three phase configuration.
- Wed, 16 Aug 2023, 04:43
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
In the Monitoring software section there is no mention of the Home assistant and Esphome combo to monitor the solar system. It's not easy but if i can do it anyone can :lol: First links: https://www.home-assistant.io/ #installed on my pi3 https://github.com/syssi/esphome-pipsolar #more details here:...
- Wed, 02 Aug 2023, 23:46
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP inverter repairs and hardware modifications
- Replies: 1549
- Views: 333464
Re: PIP inverter repairs and hardware modifications
hi guys, EDIT: After a few hours on google search Maybe a answer for the problems thanks again to everyone on the forum. i have a problem. My PIP5048MS was bought in 2019 but only now i managed to install it so it's "new". I have the 72.20c firmware for the models with 64v option. :arrow: ...
- Sun, 16 Jan 2022, 20:42
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
hi guys, a little question.
If i connect my 130v electric car battery to the 145v pv input of my 5048ms will it explode or will just gently use the power that the inverter needs
If i connect my 130v electric car battery to the 145v pv input of my 5048ms will it explode or will just gently use the power that the inverter needs
- Sun, 31 Oct 2021, 04:55
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
There is also the issue of clipping of the output, and the potential damage this could cause to motors and transformers. In a 64V model, clipping starts at above 48.0V, so at 35V (if the inverter could even operate), clipping would be dangerously severe. See this post for details, as well as Webber...
- Sat, 30 Oct 2021, 03:04
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
hi, is it possible so set the low voltage to 35v? My batteries are nicd they go from 5 to 8.15v at full charge and then balance at 5A for 3 hrs. If i use 7s i would need 35v cutoff and full charge would be ok. If i use 8s cutoff is ok at 40v but can only get 8v at full charge for the 64v model. (i f...
- Thu, 23 May 2019, 17:21
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
peugeot 106, same as all first gen psa (peugeot citroen)
the spanner was just for a few minutes it's all gone now
the spanner was just for a few minutes it's all gone now
- Thu, 23 May 2019, 02:52
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
I don't have a battery yet and 27.3v from my psu is no good to power the beast so i used my 20y old nicd from my car.
Updated to 72.20e thank you guys for all the wonderful work you did.
Updated to 72.20e thank you guys for all the wonderful work you did.
- Sun, 17 Feb 2019, 10:02
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
just found this inverter really close to me thanks to you guys or i would have bought it
- Tue, 12 Feb 2019, 07:15
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-5048GE/GK/MG/MGX/MAX inverters (with unsafe SCC)
- Replies: 821
- Views: 305548
Re: PIP-5048GE, PIP-5048GK and PIP-5048MG inverters (with unsafe SCC)
So 80A only for the charger? Solar imput 18A sounds so small :shock: in the manual recomended pv Breaker 60A and When selecting proper PV modules, please be sure to consider below parameters: 1. Open circuit Voltage (Voc) of PV modules not exceeds max. PV array open circuit voltage of inverter. 2. O...
- Mon, 11 Feb 2019, 21:48
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-5048GE/GK/MG/MGX/MAX inverters (with unsafe SCC)
- Replies: 821
- Views: 305548
Re: PIP-5048GE, PIP-5048GK and PIP-5048MG inverters (with unsafe SCC)
hi guys, how is the harmonic distortion on those units? i saw a video on YT and it was really bad
https://www.youtube.com/watch?v=SHcdeIk_vq8
https://www.youtube.com/watch?v=SHcdeIk_vq8
- Mon, 11 Feb 2019, 20:39
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277207
Re: PIP-4048MS and PIP-5048MS inverters
There is so much bad and good feedback about these units but this community is so smart and helpful that it makes you think twice about the purchase.
Any feedback on units coming out this year? I am interested in the 5048MG that is max 450v PV so no firmware from you guys
Any feedback on units coming out this year? I am interested in the 5048MG that is max 450v PV so no firmware from you guys