AEVA Forums

I will also warn others against performing the upgrade with the grid connected to the inverters: for 2 out of 3 inverters the flashing went on without issues, the 3rd one started extremely slow (more than 1h to 40%) and kept dropping out of the process at various percentages. Re-trying would usuall...

coulomb wrote: ↑

Thu, 05 Jul 2018, 05:40

Yes. Crude, but effective

Cool, what relay/contactor do you use for that ?

Thanks

How does the BMS drop out the PIP system, disconnect battery ? Yes. Crude, but effective :evil: The neutral from the inverter is switched, but not the supply neutral. I don't think i got this, you mean that you only switch the load, but you leave the inverter with the GRID ON ? Sorry, that was a bi...

hey guys, i'm thinking of switching off the PIPs during night and switch them on in the morning, i have 3 PIPs and i don't like the consumption of ~3 amps :). do you think its ok to do that ? also what do you think will be the best solution for that, i'm thinking at switching load to grid, wait a co...

hey guys,
do you have any idea that if i use POPnn to switch the inverter to grid/battery few times / day, will be written to EPROM and decrease the number of writes ?
thanks

Hi guys,
i want to add some Pylontech batteries to my setup,
Can the ICC software manage my PIPs for charging the Pylontech batteries using the modified firmware, or should i make my own scripts to manage the charging.
Thanks
IonutD

Hi guys, I have a PIP-4048 and i want to buy 2 more to connect in series and have a 3 phase system, my setup will have 27 panels , 9 orietantion east, 9 west and 9 south and will share the same battery. Now i have some questions regarding the setup i want to do :) - in a 3 phase system its the volta...

Hi Weber, I have around two weeks on the 72.70c beta and the only issue that i notice its that the invertor temperature increased a bit after the upgrade: before the upgrade the temperature was between 40 and 45 , now its around 45-50 celsius degrees. Hi IonutD. Thanks for testing. What version wer...

Hi Weber,
I have around two weeks on the 72.70c beta and the only issue that i notice its that the invertor temperature increased a bit after the upgrade:
before the upgrade the temperature was between 40 and 45 , now its around 45-50 celsius degrees.
Thanks
IonutD