Frunk/Froot for Kona

Hyundai Interest Group
Post Reply
Peter C in Canberra
Senior Member
Posts: 527
Joined: Sun, 27 Jul 2008, 04:05
Real Name: Peter Campbell
Location: Canberra

Frunk/Froot for Kona

Post by Peter C in Canberra »

This ‘frunk’ or ‘froot’ almost fits too well to be coincidence: https://www.youtube.com/watch?v=5kurEcjkVBk
You can skip the first half of the video - it is just fitting a gas lift strut thingy to the bonnet. See how the moulded charge cable and accessory tray just neatly fits under the bonnet.
Also here: https://www.speakev.com/threads/kona-ge ... nk.127544/

I suspect that expanded polystyrene might not hold up well bouncing on the 4 supports of the original bit of plastic ‘shield’. However, it looks like a better made box of useful volume would be designed to mount in the same place and retain the same ventilation clearance as that bit of plastic. Here someone has had just that thought with a less neat but probably more robust variation: https://www.goingelectric.de/forum/view ... 9&start=70 (scroll down to pictures)

And a variation: or https://www.ebay-kleinanzeigen.de/s-anz ... 5-223-5875

On a trip with the back full of luggage, it could be handy to have more boot space and to not have the charge cord buried under luggage. Accessible next to the charge port seems a good place for a kit of extension lead plus 32A adjustable portable EVSE plus various adaptors to live permanently.
Daihatsu charade conversion 2009-18, Mitsubishi iMiEV 2013-2019, Holden Volt 2018-2019, Hyundai Kona 2019-present on the ACT's 100% renewable electricity.

User avatar
photomac
Groupie
Posts: 309
Joined: Tue, 17 Nov 2009, 21:56
Real Name: Matthew Clifton
Location: South Perth

Re: Frunk/Froot for Kona

Post by photomac »

Crickey! I’ve been looking to moulding the rear to improve storage and was looking at getting thermal camera to test temperature of controller for frunk potential. We are all mad! Kewl to see. Mmmm .... inspiration!
Yes,   we can.   Image
Hyundai Kona 64 v1 Sept 2019 onward. 00016 up to 7000+
Mitsubishi PHEV v1 Apr 2016 to Aug 2019 14500 to 72000km
Nissan LEAF v1.0 Nov 2013 to Apr 2016 00035 to 36000km

User avatar
coulomb
Site Admin
Posts: 4120
Joined: Thu, 22 Jan 2009, 20:32
Real Name: Mike Van Emmerik
Location: Brisbane
Contact:

Re: Frunk/Froot for Kona

Post by coulomb »

Peter C in Canberra wrote:
Thu, 26 Sep 2019, 12:36
You can skip the first half of the video - it is just fitting a gas lift strut thingy to the bonnet.
So... from here?


See how the moulded charge cable and accessory tray just neatly fits under the bonnet.
With unreasonable effectiveness! ;)
Nissan Leaf 2012 with new battery May 2019.
5650 W solar, 2xPIP-4048MS inverters, 16 kWh battery.
1.4 kW solar with 1.2 kW Latronics inverter and FIT.
160 W solar, 2.5 kWh 24 V battery for lights.
Patching PIP-4048/5048 inverter-chargers.

User avatar
brunohill
Groupie
Posts: 133
Joined: Thu, 08 Feb 2018, 22:32
Real Name: Phil
Location: Wangaratta

Re: Frunk/Froot for Kona

Post by brunohill »

Perhaps the space saver spare wheel that comes with the petrol Kona will then fit in the rear.

reecho
Senior Member
Posts: 743
Joined: Sun, 17 Apr 2011, 02:39
Real Name: Richard Baird
Location: Perth WA
Contact:

Re: Frunk/Froot for Kona

Post by reecho »

brunohill wrote:
Thu, 26 Sep 2019, 18:53
Perhaps the space saver spare wheel that comes with the petrol Kona will then fit in the rear.
They don't. Some new Kona ICE models now have pump and goo as well.

User avatar
g4qber
Senior Member
Posts: 1825
Joined: Sat, 31 Jul 2010, 06:27
Real Name: Joseph
Location: Perth
Contact:

Re: Frunk/Froot for Kona

Post by g4qber »

Indian Kona EV comes with spare wheel

https://youtu.be/5G6_-Qo1mwU
Attachments
753EB61F-406A-4CF2-8A76-35C0FD3C62CB.png
753EB61F-406A-4CF2-8A76-35C0FD3C62CB.png (1.32 MiB) Viewed 1893 times
2020 Model 3 SR+ - Delivered Fri 17 Jan ‘20 - k kms 35
2009 Tango - http://www.evalbum.com/211

User avatar
EVdownUnder
Groupie
Posts: 83
Joined: Wed, 14 Aug 2019, 16:08
Real Name: Patrick Ulrich
Location: Upwey
Contact:

Re: Frunk/Froot for Kona

Post by EVdownUnder »

g4qber wrote:
Wed, 02 Oct 2019, 05:15
Indian Kona EV comes with spare wheel
I'm not surprised... For having spent a few months in India, many k's on the road including a head-on collision with a truck in a taxi... Any car in India should come with a spare.
A spare car that is :lol:
Ceramic blue Kona Highlander - Current stats:
As of 06 July 2020 (10 months of ownership)
30'800km at an average speed of 57km/h
127Wh/km from new

Manto
Noobie
Posts: 23
Joined: Sat, 01 Feb 2020, 19:34
Real Name: Richard

Re: Frunk/Froot for Kona

Post by Manto »

Have done this and the gas struts as well which are pretty cool
20191019_151525.jpg
20191019_151525.jpg (3.28 MiB) Viewed 1092 times

Peter C in Canberra
Senior Member
Posts: 527
Joined: Sun, 27 Jul 2008, 04:05
Real Name: Peter Campbell
Location: Canberra

Re: Frunk/Froot for Kona

Post by Peter C in Canberra »

I have just ordered one of these frunk/froots for myself and one for a friend. Postage was 65 Euro whether one or two was sent, so we shared the shipping cost. Total was about $340 each after conversion.
I was reassured by the seller having bothered to do some checking on temperature rise with and without the frunk using thermal imaging and she payed attention to recording details such length of charging and ambient temperature. See here: http://www.frunk.at/en/generally/
Being mounted the same way with the same gap as the silly plastic shield thingy, the air flow should be pretty much the same. The item immediately below is the on-board charger.
I was also impressed when I realised the top edge is shaped to follow the contours of the bonnet snuggly so stuff cannot bounce out and not much dust should get in.
I like putting an assortment of cables out of the way of everything else, not stuck underneath luggage and right next to the charge port.
Daihatsu charade conversion 2009-18, Mitsubishi iMiEV 2013-2019, Holden Volt 2018-2019, Hyundai Kona 2019-present on the ACT's 100% renewable electricity.

bje
Noobie
Posts: 16
Joined: Sun, 19 Apr 2020, 12:09

Re: Frunk/Froot for Kona

Post by bje »

Looks interesting, Peter!

Peter C in Canberra
Senior Member
Posts: 527
Joined: Sun, 27 Jul 2008, 04:05
Real Name: Peter Campbell
Location: Canberra

Re: Frunk/Froot for Kona

Post by Peter C in Canberra »

Here it is installed.
Attachments
IMG_1260.JPG
IMG_1260.JPG (2.31 MiB) Viewed 490 times
IMG_1262.JPG
IMG_1262.JPG (3.02 MiB) Viewed 490 times
IMG_1263.JPG
IMG_1263.JPG (2.55 MiB) Viewed 490 times
IMG_1273.JPG
IMG_1273.JPG (2.82 MiB) Viewed 490 times
IMG_1274.JPG
IMG_1274.JPG (2.88 MiB) Viewed 490 times
IMG_1275.JPG
IMG_1275.JPG (2.66 MiB) Viewed 490 times
Daihatsu charade conversion 2009-18, Mitsubishi iMiEV 2013-2019, Holden Volt 2018-2019, Hyundai Kona 2019-present on the ACT's 100% renewable electricity.

Peter C in Canberra
Senior Member
Posts: 527
Joined: Sun, 27 Jul 2008, 04:05
Real Name: Peter Campbell
Location: Canberra

Re: Frunk/Froot for Kona

Post by Peter C in Canberra »

Manto wrote:
Sun, 08 Mar 2020, 18:35
Have done this and the gas struts as well which are pretty cool
Our Hyundai dealer stressed to us that we should not push down on the bonnet to close it because it is a soft aluminium. Instead, we were instructed, we should just drop the bonnet from a certain height to close.
How have things worked out with the gas struts?
Daihatsu charade conversion 2009-18, Mitsubishi iMiEV 2013-2019, Holden Volt 2018-2019, Hyundai Kona 2019-present on the ACT's 100% renewable electricity.

Manto
Noobie
Posts: 23
Joined: Sat, 01 Feb 2020, 19:34
Real Name: Richard

Re: Frunk/Froot for Kona

Post by Manto »

Havent had an issue with the gas struts. It does take a bit of a slam to close the bonnet and I do this without pushing down on it. My frunk arrived last week as well
Frunk.jpg
Frunk.jpg (1.48 MiB) Viewed 448 times

User avatar
EVdownUnder
Groupie
Posts: 83
Joined: Wed, 14 Aug 2019, 16:08
Real Name: Patrick Ulrich
Location: Upwey
Contact:

Re: Frunk/Froot for Kona

Post by EVdownUnder »

It does look very neat and practical.
Anyone in Melbourne interested to join me to save on shipping cost?
Ceramic blue Kona Highlander - Current stats:
As of 06 July 2020 (10 months of ownership)
30'800km at an average speed of 57km/h
127Wh/km from new

User avatar
photomac
Groupie
Posts: 309
Joined: Tue, 17 Nov 2009, 21:56
Real Name: Matthew Clifton
Location: South Perth

Re: Frunk/Froot for Kona

Post by photomac »

Question . how much dust and spray gets into the Frunk box?
Should an elastic cover be added or does the aluminium bonnet‘s foam do the trick?
I have noticed the AC charger beneath ( faux engine block head ) gets quite warm and can exceed 65C so a space is required to vent and the foam wedged down on top is not a good idea. Comments?
Yes,   we can.   Image
Hyundai Kona 64 v1 Sept 2019 onward. 00016 up to 7000+
Mitsubishi PHEV v1 Apr 2016 to Aug 2019 14500 to 72000km
Nissan LEAF v1.0 Nov 2013 to Apr 2016 00035 to 36000km

Peter C in Canberra
Senior Member
Posts: 527
Joined: Sun, 27 Jul 2008, 04:05
Real Name: Peter Campbell
Location: Canberra

Re: Frunk/Froot for Kona

Post by Peter C in Canberra »

photomac wrote:
Thu, 16 Jul 2020, 22:04
Question . how much dust and spray gets into the Frunk box?
Should an elastic cover be added or does the aluminium bonnet‘s foam do the trick?
I have noticed the AC charger beneath ( faux engine block head ) gets quite warm and can exceed 65C so a space is required to vent and the foam wedged down on top is not a good idea. Comments?
Mine has been in place for a few months and its insides are staying clean. I think the trimmed edge of the Austrian 'premium' box is well matched to the shape of the underside of the bonnet.
Yes, the AC charger below gets warm. I also would not use the foam out of the back of the car in the front. The Austrian Frunk maintains the air gap above the charger and their site shows thermal images showing that the charger does not get any warmer with the Frunk compared with the original plastic cover.
A friend made an enquiry about the Austrian frunk recently and was told they are revising their design to use a custom box rather than the modified off-the-shelf boxes they have used until now.
Daihatsu charade conversion 2009-18, Mitsubishi iMiEV 2013-2019, Holden Volt 2018-2019, Hyundai Kona 2019-present on the ACT's 100% renewable electricity.

Post Reply