Search found 12 matches

by dekin
Tue, 14 Apr 2020, 13:47
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

I was struggling with a similar setup: 2xUS3000, AXPERT King 5K, 6x330W solar panels, and solpiplog / EMONCMS on Raspberry PI4 for monitoring. Firmware U1=71.80 (issue is the same with 71.86), PYL option in program # 5. The inverter limits the maximum charge current depending on the SOC of the batt...
by dekin
Wed, 08 Apr 2020, 13:30
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

There seems to be a bug in the King firmware such that it ignores load power for the purposes of determining maximum PV power, i.e. it is ignoring what in other firmwares is called the Solar Balance setting (setting 31). At least when Battery Type (setting 05) is set to PYL. It's possible that your...
by dekin
Wed, 08 Apr 2020, 03:06
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

Hi guys I need help in understanding how the mppt of this inverter behaves I have a pip 5048mk connected to Pylontech batteries with setting 05 PLY activated I have observed lately that when the sun is shining bright and consistent, the mppt clips the production below 2900w from a total pv of 4600w....
by dekin
Wed, 20 Nov 2019, 00:45
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2697
Views: 630093

Re: PIP-4048MS and PIP-5048MS inverters

Lagos Nigeria
by dekin
Tue, 19 Nov 2019, 15:23
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2697
Views: 630093

Re: PIP-4048MS and PIP-5048MS inverters

Hi coulomb Using an online PV calculator with a maximum and minimum temperature recordered in my location as 33 and 22 degrees, connecting a 375W panels in 3S gives a maximum voc of 144 which is below the 145V for the Axpert King inverter. Is it advisable to still go this route? I keeping reading fr...
by dekin
Sun, 10 Nov 2019, 22:45
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

Hi dekin. Thanks for the question. Yes, that will be fine, provided the inverter (PIP-5048MK or Axpert King 5K) is dated 2019 (or later) and you have set it up to communicate with the Pylontech BMS as per Appendix B of the inverter manual . Sorry I forgot to mention that in the post above. I have n...
by dekin
Sun, 10 Nov 2019, 20:31
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

Hi Weber thanks for the software
Will this version be ok for Pylontech batteries LiFeP04 which usually come in 15S?
by dekin
Fri, 01 Nov 2019, 21:35
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

[ Moderator note: moved from "PIP inverter repairs and hardware modifications" topic ] @dekin, please note that I moved your post to this topic. I am having an error F56 on my PIP MK5048 inverter So that's the "Battery is not connected" fault code. Does the inverter come on with the battery as the ...
by dekin
Thu, 31 Oct 2019, 14:08
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

[ Moderator note: moved from "PIP inverter repairs and hardware modifications" topic ] Good day guys I am having an error F56 on my PIP MK5048 inverter It trips off with that error anytime I try to on it this just started happening this morning as I write this. I have been using it for over a month ...
by dekin
Tue, 15 Oct 2019, 01:57
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

Can anyone with a 'recent' PIP-5048MK confirm that the 'PYL' option is available in menu 05: Without having a PylonTech BMS connected. If so, what firmware do you have. I need to know BEFORE I make another expensive useless purchase :o I have the 5048MK and yes the PYL option is available in option...
by dekin
Mon, 14 Oct 2019, 20:18
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

Hello dekin The HLK-RM04 is an rs232 to tcpip converter , wireless access point and router. If you use one at the inverter and a computer for monitoring you install "NetBurner Virtual Comm Port" on the computer and it appears as a normal com port on the computer. If you use two HLK-RM04 one at each...
by dekin
Sun, 13 Oct 2019, 16:12
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-5048MK inverter
Replies: 305
Views: 34913

Re: PIP-5048MK inverter

paulvk wrote:
Fri, 27 Sep 2019, 17:03
I use the HLK RM04 wifi to rs232 works great.
Hi paulvk
do you mind sharing how you got this to work with your 5048MK?
Thanks