CCS 1 BMW i3's

BMW EV Interest Group
Post Reply
dholms
Noobie
Posts: 1
Joined: Wed, 19 Sep 2018, 08:34

CCS 1 BMW i3's

Post by dholms » Wed, 19 Sep 2018, 08:42

Hi there,

Looking to get a conversation started with owners of CCS type 1 i3's.

How many KM's have you done?

What's your average daily round trip commute?

What's your typical ECO Pro + range?

Has anyone retrofitted their CCS1 to CCS type 2 through BMW
- I know this was offered for free in NZ but BMW Australia is declining to retrofit under warranty
- Does anyone know anyone who has had their i3 retrofitted?

What adapters do you use? How reliable do you find them?

Cheers!

User avatar
lopezjm2001
Groupie
Posts: 81
Joined: Mon, 02 Feb 2015, 20:37
Real Name: John Lopez
Location: Sydney

Re: CCS 1 BMW i3's

Post by lopezjm2001 » Mon, 29 Oct 2018, 04:46

I tried to DC fast charge my BMW i3 at Mittagong RSL https://www.plugshare.com/location/166796. I found that this charger only uses CCS type 2 so I could not do DC fast charge. My BMW i3 only uses a CCS type 1 plug. Does anybody know if there are any options for me? Adaptor cable? Looks like I will have to speak to BMW in Australia.
Did BMW change from type 1 to type 2? and When?
Last edited by lopezjm2001 on Mon, 29 Oct 2018, 05:38, edited 1 time in total.
2016 BMW i3 94AH
13.08 Batt.Kapa.max 29.7 kWh

User avatar
dgh853
Groupie
Posts: 84
Joined: Thu, 05 Jun 2014, 03:19
Real Name: David Hiley
Location: Sydney
Contact:

Re: CCS 1 BMW i3's

Post by dgh853 » Mon, 29 Oct 2018, 05:36

Setec make a CCS Combo 2 to CCS Combo 1 Adaptor and there should be others as well - http://www.setec-power.com/china/ccs-co ... -1-adapter
2015 Outlander PHEV Aspire
2013 Nissan Leaf

User avatar
lopezjm2001
Groupie
Posts: 81
Joined: Mon, 02 Feb 2015, 20:37
Real Name: John Lopez
Location: Sydney

Re: CCS 1 BMW i3's

Post by lopezjm2001 » Mon, 29 Oct 2018, 05:42

dgh853 wrote:
Mon, 29 Oct 2018, 05:36
Setec make a CCS Combo 2 to CCS Combo 1 Adaptor and there should be others as well - http://www.setec-power.com/china/ccs-co ... -1-adapter
Thanks. Looks good.
Can anybody confirm that they actually work in Australia with a BMW i3?
They quoted me US$1000 plus delivery. :(
2016 BMW i3 94AH
13.08 Batt.Kapa.max 29.7 kWh

Jon8
Noobie
Posts: 4
Joined: Wed, 11 Jul 2018, 20:35
Real Name: Jon Edwards
Location: Perth WA

Re: CCS 1 BMW i3's

Post by Jon8 » Tue, 30 Oct 2018, 06:11

I bought a CCS1 to CCS2 from Setec it works ok..have a look at Franklin St Adelaide on PS there is pic of the adaptor in use

User avatar
lopezjm2001
Groupie
Posts: 81
Joined: Mon, 02 Feb 2015, 20:37
Real Name: John Lopez
Location: Sydney

Re: CCS 1 BMW i3's

Post by lopezjm2001 » Tue, 30 Oct 2018, 06:45

Jon8 wrote:
Tue, 30 Oct 2018, 06:11
I bought a CCS1 to CCS2 from Setec it works ok..have a look at Franklin St Adelaide on PS there is pic of the adaptor in use
Thanks, any idea what your maximum charge power was in kW? Did you get the max 50kW?
I decided to get one from https://www.evseadapters.com/collection ... us-adapter. A bit cheaper and they also use Paypal. Setec would only accept a international bank transfer in US dollars only and their postage cost was considerably higher.
I did some reading on the evseadaptors website and found out that both CCS 1 and CCS 2 use the same communications protocol so it is purely pin to wire to pin with no adaptor PCB. I guess it is the high current pins which makes them so f...… expensive. It is really just an expensive plug adaptor.

There are two issues with using an adaptor.
1. They can be forced apart and stolen.
2. They are not safe in the rain. The two joining plugs could be sitting in a puddle of water.

So I am considering swapping out the combo plug inlet with a type 2. Which you can buy from https://www.evse.com.au/ccs-type2-inlet ... ocket.html. Both types 1 and 2 use the same fast charge communications protocol.
The CCS 1 and CCS 2 share the same DC fast charging protocol. The only significant differences are the shape of the plug and the value of the internal proximity resistor. So this works perfectly without requiring a protocol adapter. (CHAdeMO and CCS however use entirely different protocols.) Although there appear to be male plugs on each end, actually one is male and the other is female. We've tested this adapter extensively with several vehicles to make sure it operates as intended.
2016 BMW i3 94AH
13.08 Batt.Kapa.max 29.7 kWh

User avatar
lopezjm2001
Groupie
Posts: 81
Joined: Mon, 02 Feb 2015, 20:37
Real Name: John Lopez
Location: Sydney

Re: CCS 1 BMW i3's

Post by lopezjm2001 » Thu, 01 Nov 2018, 14:30

Setec Power tell me they sell stacks of these adaptors to Norway. They also distribute the same adaptor to www.evseadapters.com.

They sent me a photo of all these adaptors going to Europe
https://drive.google.com/open?id=1NUo4v ... v8TJDE3XC3
2016 BMW i3 94AH
13.08 Batt.Kapa.max 29.7 kWh

johc
Noobie
Posts: 1
Joined: Sat, 26 Jan 2019, 14:19
Real Name: John Croker

Re: CCS 1 BMW i3's

Post by johc » Tue, 05 Mar 2019, 17:40

I have also just obtained one of these adaptors from Setec and tried it out on the weekend. It worked fine although the car end of the adaptor is a little stiff to fit and to get to "click" into place. Total cost was just under $2,000, importing it direct from China. Still no response from BMW Sydney regarding a quote for converting the car to CCS2, several weeks after putting in the request. Charging from about 30% battery to 80% took about 20 minutes.

Coho
Noobie
Posts: 3
Joined: Sun, 11 Nov 2018, 13:38

Re: CCS 1 BMW i3's

Post by Coho » Wed, 17 Apr 2019, 07:40

I'm in the process of converting my CCS1 to CCS2. I've just got the parts in from BMW (overseas) so I hope to do it over the next week or so :) Total cost so far is around $1500 AUD. The quotes I got from BMW to do this retrofit are around the $5000 mark :(

Coho
Noobie
Posts: 3
Joined: Sun, 11 Nov 2018, 13:38

Re: CCS 1 BMW i3's

Post by Coho » Wed, 17 Apr 2019, 07:48

Apologies if I've posted already but I don't see it on the thread. I've also looked into the adaptor, unofficial recommendation from BMW. The CCS1 to CCS2 retro fit price I've been given is around 5000 mark :( I've ended up sourcing the parts and will install them over the next few weeks. Total cost is around $1500 from overseas. So far the parts look like they should bolt off, bolt on.

User avatar
lopezjm2001
Groupie
Posts: 81
Joined: Mon, 02 Feb 2015, 20:37
Real Name: John Lopez
Location: Sydney

Re: CCS 1 BMW i3's

Post by lopezjm2001 » Wed, 17 Apr 2019, 08:41

Which parts did you source? Thanks.
2016 BMW i3 94AH
13.08 Batt.Kapa.max 29.7 kWh

Coho
Noobie
Posts: 3
Joined: Sun, 11 Nov 2018, 13:38

Re: CCS 1 BMW i3's

Post by Coho » Wed, 17 Apr 2019, 18:35

The HV Cable set CCS 2, the type 2 plug cover and the CCS2 surrounding plate. The HV Cable set is the expensive one. I'm hoping any bolts and nuts will be the ones off my car. I believe the existing Cable set connects to the KLE. I'm hoping the connector will fit onto the KLE with no problems as the new HV cable set is three phase...I'll find out soon enough.

User avatar
lopezjm2001
Groupie
Posts: 81
Joined: Mon, 02 Feb 2015, 20:37
Real Name: John Lopez
Location: Sydney

Re: CCS 1 BMW i3's

Post by lopezjm2001 » Fri, 19 Apr 2019, 18:34

Do you know whether the KLE will support the two extra phases? Do you think it might require Esys coding to go from J1772 to Mennekes? Good luck. Let us know how you go as I am also interested in doing this. The only down side is that the Mennekes on the new BMW i3 2018 will not work with the Tesla destination chargers. But the older BMW i3 with J1772 will work on Tesla destination chargers using an adapter cable.
2016 BMW i3 94AH
13.08 Batt.Kapa.max 29.7 kWh

Post Reply