AC51 first start up Help

AC, DC, amps, volts and kilowatt. It's all discussed in here
Post Reply
goingbush
Groupie
Posts: 34
Joined: Sat, 15 Jul 2017, 04:48
Real Name: Don
Location: Yarrawonga
Contact:

AC51 first start up Help

Post by goingbush » Thu, 04 Jan 2018, 14:43

Near completion of my EV Landrover,

First test run of AC51 today , everything hooked up correct , 100% soc 144v x 200AH pack , BMS running fine , no errors

Type 2 throttle , deadband & max programmed in spyglass . Max RPM from motor = 24 RPM , what am I missing ??

goingbush
Groupie
Posts: 34
Joined: Sat, 15 Jul 2017, 04:48
Real Name: Don
Location: Yarrawonga
Contact:

Re: AC51 first start up Help

Post by goingbush » Fri, 05 Jan 2018, 05:43

Problem solved, someone on diy electric car forum suggested I swap the phase cables on motor , despite the fact that they were correct as per labeling, this solved the problem , now spools up to 6500 smooth all the way :) !!

User avatar
jonescg
Senior Member
Posts: 2250
Joined: Thu, 21 Jan 2010, 23:05
Real Name: Chris Jones
Location: Perth, WA.

Re: AC51 first start up Help

Post by jonescg » Fri, 05 Jan 2018, 08:52

Glad it was resolved quickly (pun not intended).
AEVA National Secretary, WA branch vice-chair

Post Reply