Curtis 1227 not registering throttle input

AC, DC, amps, volts and kilowatt. It's all discussed in here
Post Reply
Zolate
Noobie
Posts: 1
Joined: Tue, 24 May 2016, 16:22
Real Name: Peter Murnane
Location: Melbourne

Curtis 1227 not registering throttle input

Post by Zolate » Thu, 26 May 2016, 01:23

Golf cart with 1227 controller is not registering throttle input.
Controller and programmer both registering no faults.
(Even with throttle input)
Throttle is 0-5 volt Hall effect and reads fine.
Signal from throttle is reaching controller.
Programmer does not show any increase (0%) in throttle percentage
Even with throttle input up to 5v.
Any help with suggestions for a fix, a repair or a reasonable
Supplier much appreciated.
Thanks
Zolate

Post Reply