0-10v throttle

AC, DC, amps, volts and kilowatt. It's all discussed in here
Post Reply
Madmax
Noobie
Posts: 21
Joined: Mon, 16 May 2016, 23:52
Real Name: Matt
Location: Melbourne

0-10v throttle

Post by Madmax » Mon, 23 May 2016, 05:19

Hi all,

where/what is a good source for a 0-10v throttle?

cheers!

User avatar
jonescg
Senior Member
Posts: 2159
Joined: Thu, 21 Jan 2010, 23:05
Real Name: Chris Jones
Location: Perth, WA.

0-10v throttle

Post by jonescg » Mon, 23 May 2016, 20:08

Wouldn't any throttle work? They're just voltage dividers. Do yoy mean a 10 kOhm potentiometer?
AEVA National Secretary, WA branch vice-chair

User avatar
Richo
Senior Member
Posts: 3196
Joined: Mon, 16 Jun 2008, 00:19
Real Name: Richard
Location: Perth, WA

0-10v throttle

Post by Richo » Mon, 23 May 2016, 20:30

There not all pots.
Half of them will be hall type which are 5V.
If you can find the pot type it should work on 10V

I'll assume you're wanting one for an Industrial VFD which generally use 10V.
http://www.evworks.com.au/ev-works-thro ... istive-typ
You will need to solder the third wire on for it to be suitable for a FVD.
Help prevent road rage - get outta my way! Blasphemy is a swear word. Magnetic North is a south Pole.

Madmax
Noobie
Posts: 21
Joined: Mon, 16 May 2016, 23:52
Real Name: Matt
Location: Melbourne

0-10v throttle

Post by Madmax » Tue, 24 May 2016, 01:14

0-5V should also work (simply config the controller).

Richo, yes its for an industrial controller... I have a couple of Dunkermotoren BG75x50PI motors which have integral controllers that I'm testing for a project.



mortonpiers
Noobie
Posts: 15
Joined: Mon, 11 May 2015, 03:10
Real Name: Piers Morton
Location: Geelong Vic

0-10v throttle

Post by mortonpiers » Wed, 28 Dec 2016, 22:03


Post Reply