Page 1 of 1

Looking for 2x calb 40a/h

Posted: Sun, 19 Apr 2020, 11:30
by Dan007a
Looking, to see if anyone has 2 x40amp hour calb lifepo4 cells they wish to sell .

Re: Looking for 2x calb 40a/h

Posted: Sun, 19 Apr 2020, 19:24
by jonescg
Hi Dan - might be able to help. I have a battery which belongs to someone else, but I don't think they will be using it again. Will find out.

Re: Looking for 2x calb 40a/h

Posted: Mon, 20 Apr 2020, 16:15
by Dan007a
Thank you. Will wait to hear

Re: Looking for 2x calb 40a/h

Posted: Fri, 21 Aug 2020, 22:11
by jonescg
Dan007a wrote: Mon, 20 Apr 2020, 16:15 Thank you. Will wait to hear
Hi Dan, I still haven't heard back from him. I hope he's not passed away, as he was not well. Either way, if I can't get a hold of him, I think they're probably due to go to a better home.

Re: Looking for 2x calb 40a/h

Posted: Sun, 23 Aug 2020, 09:58
by antiscab
Dan do you need the older blue case size 40Ah cells? Or the newer 115mm wide grey case size cells? I have a few of the former

Re: Looking for 2x calb 40a/h

Posted: Sun, 23 Aug 2020, 09:59
by antiscab
Wait, never mind, I just realised mine were 60Ah cells (with 35Ah or so remaining capacity)

Re: Looking for 2x calb 40a/h

Posted: Tue, 25 Aug 2020, 11:08
by T1 Terry
antiscab wrote: Sun, 23 Aug 2020, 09:58 Dan do you need the older blue case size 40Ah cells? Or the newer 115mm wide grey case size cells? I have a few of the former
How many do you have? I'm interested as I need a few as well.
Chris, what is the physical size of these cells and how many do you have?

T1 Terry

Re: Looking for 2x calb 40a/h

Posted: Tue, 25 Aug 2020, 12:46
by jonescg
180 x 115 x 45.
16 of them with EV-Power cell top modules on them.
I still haven't heard from the owner of them, but will try once more.

Re: Looking for 2x calb 40a/h

Posted: Wed, 02 Sep 2020, 13:25
by T1 Terry
Any news Chris? Any idea of price?

T1 Terry

Re: Looking for 2x calb 40a/h

Posted: Fri, 11 Sep 2020, 08:46
by jonescg
Hi @Dan007a and @T1 Terry
Still haven't heard back from Brett Gilles, but there are three folks with pressing needs for these cells.

These are the grey CALB 40 Ah cells measuring 180 x 115 x 45 and have 16 of them. Ian Porter needs as many as he can get for his Vectrix, so if those who need only a few can get in first he;ll take the balance.

Re: Looking for 2x calb 40a/h

Posted: Sat, 12 Sep 2020, 11:00
by T1 Terry
What price each? I'll take as many as you will part with if the price is good .....

T1 Terry

Re: Looking for 2x calb 40a/h

Posted: Sat, 12 Sep 2020, 12:09
by jonescg
OK so two for Dan, one for Simon, and the remaining 13 split between Terry and Ian? Ian needs probably about 7 for his Vectrix.

Re: Looking for 2x calb 40a/h

Posted: Sun, 13 Sep 2020, 09:44
by jonescg
Ian needs about 18 of them, so sorry Terry, I might keep it local. At least this will get three EVs back on the road :)

Re: Looking for 2x calb 40a/h

Posted: Sun, 13 Sep 2020, 11:50
by T1 Terry
These border issues are getting worse eh :lol: No worries, maybe a few more tired EV packs will come up in the future that I can scavenge a few cells from ... or maybe even the whole pack if the price is right :)

T1 Terry

Re: Looking for 2x calb 40a/h

Posted: Sun, 04 Oct 2020, 13:12
by jonescg
Hey Terry, Ian has changed his mind, so if you want to buy 13 of them you are welcome. How's $500 sound?
I can send them with Northline, so that might be about $150 to SA. Comes with EV Power BMS cell top modules too if you're interested.

@Dan007a and @Simon I've set your cells aside, so let me know when you want to collect them.
20201004_130506.jpg
20201004_130506.jpg (89 KiB) Viewed 845 times

Re: Looking for 2x calb 40a/h

Posted: Sun, 04 Oct 2020, 17:09
by coulomb
jonescg wrote: Sun, 04 Oct 2020, 13:12 so if you want to buy 13 of them you are welcome.
You realise that's a photo of 12 cells, right?

Re: Looking for 2x calb 40a/h

Posted: Sun, 04 Oct 2020, 17:24
by jonescg
Yes, the other four on the bench below. I had initially set 4 aside, but turns out I only need set three aside.

Re: Looking for 2x calb 40a/h

Posted: Sat, 10 Oct 2020, 14:19
by T1 Terry
PM on its way Chris

T1 Terry