Pot box needed

Technical discussion on converting internal combustion to electric
Post Reply
jpcw
Posts: 154
Joined: Wed, 05 Sep 2007, 19:08
Real Name: John Williams
Location: Perth
Contact:

Pot box needed

Post by jpcw » Mon, 17 Sep 2007, 23:19

Can anyone recommend where I can get a pot box for the zapi h2 controller? Needs to be a 3 wire 5k pot from what I can tell.

roddilkes
Posts: 173
Joined: Tue, 18 Sep 2007, 18:07
Real Name: Rod
Location: WA, Australia
Contact:

Pot box needed

Post by roddilkes » Thu, 20 Sep 2007, 19:28

Try Mike King at Bylong Industries in NSW.

jpcw
Posts: 154
Joined: Wed, 05 Sep 2007, 19:08
Real Name: John Williams
Location: Perth
Contact:

Pot box needed

Post by jpcw » Thu, 20 Sep 2007, 20:16

Thanks Rod, I think I have one organised but I'll keep Mike in mind.
“The best way to predict the future is to invent it,” Alan Kay 1971

User avatar
Thalass
Posts: 741
Joined: Sun, 12 Aug 2007, 07:29
Real Name: Ben Rypstra
Location: Perth, WA, AU

Pot box needed

Post by Thalass » Fri, 21 Sep 2007, 17:02

Try dick smith... :P

(Personally I'm not a fan of the potentiometer. They wear out after a while, and start getting jumpy and noisy. And the last thing I want while riding a bike at 80km/h is for the engine to suddenly start going wonky!)

jpcw
Posts: 154
Joined: Wed, 05 Sep 2007, 19:08
Real Name: John Williams
Location: Perth
Contact:

Pot box needed

Post by jpcw » Fri, 21 Sep 2007, 17:38

Yeah I was going to do that but it's the mechanical linkage part that I was concerned about. Anyway I said stuff it and ordered one from the US, the postage costs almost the same as the potbox itself :(
“The best way to predict the future is to invent it,” Alan Kay 1971

Nickjohnson
Posts: 4
Joined: Tue, 11 Jul 2017, 02:24
Real Name: Nicholas Johnson
Location: Braidwood

Pot box needed

Post by Nickjohnson » Sat, 15 Jul 2017, 00:47

1

Post Reply