Search found 8 matches

by Kimo-23
Mon, 20 Aug 2018, 20:50
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

hi
after attach the batteries and start the inverter, it shutdown after 15 second or less because it's in FAULT 03 and i can't comunicate with it and configure Realterm :x :x :x :x .
in this case how can i reset the firmware
thanks
by Kimo-23
Mon, 20 Aug 2018, 05:30
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

Thank you very much
The inverter it should be attached ti the battery and PV ti do the Reset?
Thank you for your patience
by Kimo-23
Sat, 18 Aug 2018, 23:22
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

thanks to all of you because you are helping me. I'm not so practical about these things. can you explain to me how I can update / reset my opti-solar.thanks a thousand
by Kimo-23
Thu, 16 Aug 2018, 00:24
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

My recollection is that the 2-pin connector from the SCC is just as an alternative way to start the machine. So I don't think that should stop the inverter from displaying anything. Use the rocker switch under the machine to start it. Coulomb is correct. I just tried it. i see the 119 figure in the...
by Kimo-23
Wed, 15 Aug 2018, 01:58
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

in the display where there is battery information, it gives me a voltage of 119 volts !!!!! The LC Display of the inverter model we know shows the battery voltage as NN.N, so a maximum of 99.9 V. How did you see the 119 V figure? Edit: "does not start" could mean doesn't invert, or nothing displays...
by Kimo-23
Tue, 14 Aug 2018, 18:27
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

Hi Kimo-23. I don't recommend updating the software at this stage. I suggest disconnecting the SCC completely from the main board, and then seeing if the SP5000 will work as an inverter and AC charger without giving the error 03. My thinking is based on the fact that the main board requests the bat...
by Kimo-23
Mon, 13 Aug 2018, 14:33
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

Hi Kimo-23. When you say you replaced the "charger board", do you mean the solar charge controller (SCC) board? Or the main board that contains the AC charger (and inverter)? Hi Weber thank you for the answer. replaced the SCC that is located across the top of the inverter. I also detached the main...
by Kimo-23
Sun, 12 Aug 2018, 09:43
Forum: Renewable Energy and Storage (Non-EV)
Topic: PIP-4048MS and PIP-5048MS inverters
Replies: 2447
Views: 470792

Re: PIP-4048MS inverter

hello to everyone in this forum. I'm Italian and I'm proud to be with you in this forum. I have a problem and I hope someone can help me :-) I have an Opti-solar sp5000 brilliant inverter. it worked great for 2 years. I do not know what my dad has done, and the charger board has burned. I bought it ...