Search found 16 matches
- Wed, 30 Nov 2016, 09:12
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Hi Eventually gave up on trying to figure out how to calibrate the 24 volt 3kva voltage seems like the 24 volt model can not be calibrated at all. I kept a copy of the 24volt 3kva inverter with the 60 amp MPPT SCC Think 0243 is the latest firmware, but this version still do not stay in absorb long e...
- Mon, 21 Nov 2016, 23:29
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Your best bet for fixing this would seem to be finding the appropriate voltage divider resistor (or chain of resistors), and tweaking the values until it reads more accurately. Of course, you can't do much about drift and so on, but it sounds like a decent improvement could be had that way, if you ...
- Sat, 19 Nov 2016, 00:23
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
paulvk wrote: One thought I have is to find the current sense component and change it to fool the system after looking at fet current specs.
I also Had the thought of doing this to fool the amp sense also with voltage.
- Tue, 15 Nov 2016, 23:22
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Thanks for the info Coulomb.
Do you know what the adjustment's on the SCC are for ?
Do you know what the adjustment's on the SCC are for ?
- Fri, 11 Nov 2016, 06:04
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Is it possible to perform a voltage calibration on the 24 volt model that only have a USB port using access port ? I can fine lots of info on the PIP4048 voltage calibration using access port but nothing for the usb 24 volt 3kva model. My 24 volt inventor seems to be .2 volts lower that the actual v...
- Wed, 16 Dec 2015, 01:42
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
I can Also confirm that the fans are controlled by load at about 200watt speeds up and at about 800 watt max speed I've turned my fans around so that it blows into the case and also used tape to seal the gaps around the plastic air guide so that no air leaks out and miss the heat sink maximizing air...
- Tue, 10 Nov 2015, 04:37
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Hi
I have the 2.4 KW model running a VFD controlled pool pump and a Inverter Aircon (12000btu).
No issues at all.
I have the 2.4 KW model running a VFD controlled pool pump and a Inverter Aircon (12000btu).
No issues at all.
- Sat, 29 Aug 2015, 23:47
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Just a update on the charging issue
I loaded the PIP-MSX 2-3K_MAIN_0243 firmware and everything back to normal again.
Looks like i had a firmware bug on the 0242 firmware.
I loaded the PIP-MSX 2-3K_MAIN_0243 firmware and everything back to normal again.
Looks like i had a firmware bug on the 0242 firmware.
- Sat, 29 Aug 2015, 22:54
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
I noticed that if starting voltage is above 25 then it goes straight into float. ... I tried fld and ac charge starting at less than 25 volt and the battery voltage climbs to 29.2 and stays there. No float. What are your float and bulk voltage settings? when in user battery mode Set at 29.2 and 27 ...
- Sat, 29 Aug 2015, 01:20
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
What I meant is if I select Flooded battery as my battery type solar don't eve float, no current flows to the batteries. then when I select utility only charging voltage climbs to about 32 volt ans stays there. If i then change the battery type to USER solar starts charging as normal and switching t...
- Fri, 28 Aug 2015, 23:49
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
I Noticed something concerning on my 24 volt 2.4KW model. It relates to the battery type selection When selecting Flooded or AGM the solar charging do not kick in and start charging, if is set it to utility charging it starts to charge but does not regulate. Went all the way up to 32 volt ! before I...
- Fri, 28 Aug 2015, 03:23
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Voltonicpower revealed the 5KVA version of the updated model I mentioned earlier
http://www.voltronicpower.com/newspage.php?newsid=1075
its got 3 X MPPT trackers 180amp for a total of 9000W pv
http://www.voltronicpower.com/newspage.php?newsid=1075
its got 3 X MPPT trackers 180amp for a total of 9000W pv
- Wed, 26 Aug 2015, 04:49
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Did you guys see the new model Voltonicpower launched http://www.voltronicpower.com/oCart2/index.php?route=product/product&path=24&product_id=151 Only 1.5 and 3 KVA but the new model has got selectable output voltage, charger stage selection and CV charging time selection. The solar charger ...
- Fri, 14 Aug 2015, 07:48
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP inverter repairs and hardware modifications
- Replies: 1549
- Views: 333459
Re: PIP inverter repairs and hardware modifications
Thank you
I've been looking for the service manual
Do you have the Axpert 3K service manual also?
I've been looking for the service manual
Do you have the Axpert 3K service manual also?
- Sat, 11 Jul 2015, 02:41
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
One of the reasons I got the 2.4 KW model is the low standby consumption. I'm still building my setup so only have 2 panels. Currently I have 2 255W 36v panels in series this will be expanded to 3X2 or 3x3 if the 24 volt model can handle it I think it should be fine. Getting 340 watt at about 13:00 ...
- Sat, 11 Jul 2015, 01:57
- Forum: Renewable Energy and Storage (Non-EV)
- Topic: PIP-4048MS and PIP-5048MS inverters
- Replies: 3265
- Views: 1277182
PIP-4048MS inverter
Hi I've read the PIP-4048 forum back to back and learned alot. Im also a south African that's going solar due to our Unstable Grid. I've got the Aexpert MKS plus 3k and on my model there's no serial port, its only got a USB port so im not sure how to connect to the inverter using terra term. The Axp...